Program Settings → Prompts/Safety
Define if you want to be asked for confirmation before various actions, if you want warnings about missing modem signals, and if closing the program or a tab should be prevented while you are connected or a REXX script is running.
| Confirm before … | |
Select if you want to be prompted ('Are you sure?') to confirm various
actions throughout the program.
| |
| Show warning when modem is missing (no CTS signal) | |
The CTS signal on the serial port normally indicates the presence of a device attached to the port. If you are using hardware that does not offer a CTS signal, you can disable this option in order to avoid the warning about non-present devices.
Note: This option only applies to the Serial/Modem and Serial/Direct
communication methods.
| |
| Show warning for file transfer via modem without RTS/CTS handshake | |
The RTS/CTS handshaking method provides reliable control of the data flow between the PC and the modem. If you use serial communication with higher transfer speeds without RTS/CTS handshake, you will very likely encounter transmission errors. Enabling this option will give you a warning if you select more than 4800 bps without RTS/CTS.
Note: This option only applies to the Serial/Modem and Serial/Direct
communication methods.
| |
| Safety: Prevent closing of program or tab | |
These options can make sure that current activity is not inadvertently
interrupted by closing the program.
| |
| Reset all 'Do not show this message again' dialogs | |
This button makes ZOC show again the messages that were previously suppressed. | |
See also: Program Settings
← Back to Program Settings